你好,欢迎访问济南绿建杭环保科技有限公司官网!

济南绿建杭环保科技有限公司

全国咨询电话:

13296413278

联系我们

济南绿建杭环保科技有限公司

13296413278 

18615252676

联系人:李经理

邮箱: 13296413278@163.com

网址:http://www.jnlvjianhang.com

地址:山东省济南市章丘区刁镇工业园


企业新闻

所在位置:首页  > 企业新闻

喷漆和烤漆有什么区别?

更新时间:2021-03-11 点击数:360

开创云全域建站

鉴别烤漆和喷漆:

Identify paint baking and spray painting:

一、工艺:

1、 Process:

A、烤漆:在基材上打三遍底漆、四遍面漆,每上一遍漆,都送入无尘衡温烤房,烘烤。

A. Baking paint: three times of primer and four times of finish paint are applied on the base material, and each time the paint is applied, it is sent to the dust-free constant temperature baking room for baking.

B、喷漆:在基材上磨呢子,再在上面喷上漆,自然晾干。

B. Spray painting: grind cloth on the base material, spray paint on it, and dry naturally.

二、漆膜。

2、 Paint film.

做法:

Method:

用手摸烤漆门板的四边棱角,是否光滑、平整,观察棱角的颜色,是否与门板颜色相同。

Touch the edges and corners of the painted door panel by hand to see if they are smooth and flat. Observe whether the color of the edges and corners is the same as that of the door panel.

对比:

contrast:

A、烤漆:棱角光滑、颜色相同。证明漆膜均匀,色彩饱满。

A. Baking paint: smooth edges and corners, same color. It is proved that the film is uniform and the color is full.

B、喷漆:棱角部分毛糙,颜色比门板浅。证明漆膜不均匀,色彩不饱满:

B. Spray paint: rough edges and corners, lighter color than door panel. It is proved that the paint film is uneven and the color is not full

三、纹路。

3、 Lines.

做法:对照光线,看烤漆门板表面,是否有桔皮现象。

Method: contrast the light to see if there is orange peel on the surface of the door.

对比:

contrast:

A、烤漆:门板表面光滑,无纹路、桔皮现象。

A. Baking paint: the surface of the door panel is smooth, without grain and orange peel.

B、喷漆:门板表面有纹路,不光滑,有桔皮现象。

B. Spray paint: the surface of the door panel has grain, not smooth, orange peel phenomenon.

                         

四、表面。

4、 The surface.

做法:用手摸烤漆门板表面,是否有尘粒、气泡。

Method: touch the surface of the door with hands to see if there are dust particles and bubbles.

对比:

contrast:

A、烤漆:门板表面平整、光滑。$_Gwo2

A. Baking paint: the surface of the door panel is flat and smooth. $_ Gwo2

B、喷漆:门板表面有颗粒物,不光滑,触摸有异感。

B. Spray paint: there are particles on the surface of the door panel, which is not smooth and has a strange feeling when touching.

五、耐磨。

5、 Wear resistant.

做法:用硬物击打。

Method: hit with hard object.

对比:

contrast:

A、烤漆:无异常情况,漆膜无损坏。

A. Paint baking: no abnormality, no damage of paint film.

B、喷漆:有裂痕,严重的漆膜脱落,掉白皮。

B. Spray paint: there are cracks, serious film falling off, white skin off.

烤漆房结构与工作原理:

Structure and working principle of paint baking room:

整个烤漆房为拼装式结构。房体采用子母插式保温喷塑墙板,密封、保温性能好,房体侧面装有工作门,方便工作人员进出;铝合金包边大门,门中 央装有观察窗,可随时观察房内动态。选用低噪音高风量风机,确保喷漆效果的完善性;

The whole paint baking room is assembled structure. The room adopts the plug-in thermal insulation spray plastic wallboard with good sealing and thermal insulation performance. The side of the room is equipped with a working door, which is convenient for the staff to go in and out. The aluminum alloy side door is equipped with an observation window in the center of the door, which can observe the dynamic state of the room at any time. Low noise and high air volume fan is selected to ensure the perfection of painting effect;

感谢您的阅读,希望以上内容对您有所帮助,如您想了解更多精彩内容请点击我们的官网:厂家直销移动式喷漆房

Thank you for reading, hope the above content is helpful to you, if you want to know more wonderful content, please click our official website: manufacturer direct mobile spray booth   .


绿建杭环保

扫一扫

绿建杭环保

欢迎关注